奇强模具清洗剂QQ-71奇强快干防锈脱模顶针润滑剂防锈油洗模水
Link to the original- 100 — 1999 шт 5000$ per piece.
- 2000 — 50119 шт 4000$ per piece.
- 50120+ шт 3000$ per piece.
Inspection + photo report for $1.5.
We check the goods and take a photo report so you can make sure you get the right product without faults or damage
Delivery from China to Ukraine, Uzbekistan, European and African countries
Payable upon arrival at the warehouse in China
Returns are only possible while the item is in our warehouse in China. Once the goods have been dispatched from China, they cannot be returned
Photo and product description
强模具清洗剂
奇强模具清洗剂(QQ-71)
产地:深圳
品牌:奇强
规格:500ML 24瓶/箱
型号:QQ-71
奇强模具清洗剂是选用溶剂、分散剂、渗透剂调制而成,能迅速去除油脂、油污、色粉及其它顽固污渍;挥发性好,不留痕迹;尤其适合去除模具上成型时留下的塑胶树脂渣、模具防锈膜及污渍;能够有效去除油脂和其他工业污渍,能够对机械部件和工厂地板等各种表面发挥卓越的去污力。
1、清洗污垢的速度快,溶垢彻底。清洗剂自身对污垢有很强的反应、分散或溶解清除能力,在有限的工期内,可较彻底地除去污垢。
2、对金属不会造成腐蚀。
3、清洗过程中不会在清洗对象表面残留下不溶物,不会产生新污溃,不会形成新的有害于后续工序的覆盖层,不会影响产品的质量。
4、清洗过程及现场不会产生泡沫和异味.
正确使用方法:
1、先将模具打开,(在成型机上操作“开模”按钮,打开模具)摇匀距喷件20-25厘米处均匀直接喷射清洗。
2、摇动瓶子,均匀喷上清洗剂,如有深孔或缝隙要插上道管喷洗。
3、如模具清洗后要存放,要把模具用风枪彻底吹干,喷上模具防锈剂。
注意:勿近火源使用,勿让儿童玩耍,勿让空罐投入火焰中,宜存放在40℃以下阴凉,通风干燥处。