TF卡MP3解码板解码模块3.75V供电 带2W混合单声道记忆播放
Link to the original- 100 — 1999 шт 5000$ per piece.
- 2000 — 50119 шт 4000$ per piece.
- 50120+ шт 3000$ per piece.
Inspection + photo report for $1.5.
We check the goods and take a photo report so you can make sure you get the right product without faults or damage
Delivery from China to Ukraine, Uzbekistan, European and African countries
Payable upon arrival at the warehouse in China
Returns are only possible while the item is in our warehouse in China. Once the goods have been dispatched from China, they cannot be returned
Photo and product description
TF卡MP3解码板解码模块3.7-5V供电 带2W混合单声道 带记忆播放 音量记忆
TF卡MP3解码板,不带TF卡,支持播放MP3音乐文件,目前测试16G TF卡支持,再大的还没测试过
本模块不能采用USB 5V供电。供电方式可修改为3.7V锂电池供电。
板子右上角3组白色方框为3组轻触按键,中间一组为播放暂停键,上下2组短按为上下曲键,上下2组长按为音量+-调节。
有顾客需要自己改装U盘播放的,请向店掌柜索要资料,动手能力不强的不建议改动哦,以防烧板子呢,改U盘播放建议采用USB 5V供电,因为有些老式U盘是5V供电的,不支持锂电池的3.7V电压,所以锂电池供电时,导致U盘无法播放,新款的U盘只要是支持3.7V供电的都是可以正常播放的。
带2W单声道功放,5V供电时功放最大输出3W(建议搭配4欧3W插卡小音箱上的小喇叭,音质好,声音很大,如果觉得音量还嫌不够,请直接换4欧5瓦喇叭,声音大到吓到你的,绝对惊喜,嘿嘿。换4欧5瓦喇叭后,注意功放芯片散热哦,最好加散热片)
有顾客反映功放在播放音乐时,会有发热现象,功放芯片或功放管发热是正常的,只要不把功放开到大音量之后,短路喇叭的输出端(阻值0欧)是不会烧功放芯片的,可以放心使用。
有顾客需要回去把这个板子做功放的前级,不需要这款板子的功放,回去自己接功放,可以按如下改装,把板子的功放芯片(8脚的芯片)去掉,然后从主控的第4脚和第6脚(这两个脚是主控芯片的左右声道输出),各串联一个104(或224)的电容去功放的输入端即可(电容起隔离作用,以防同一电源供电时烧前级主控芯片或后期的功放管), 剩下一根线从负极接去功放输入的公共端
有顾客需要回去把这个板子改装用耳机听音乐的,把板子的功放芯片(8脚的芯片)去掉,然后从主控的第4脚和第6脚(这两个脚是主控芯片的左右声道输出),各串联一个104(或224)的电容去耳机的左右声道, 剩下一根线从负极接去耳机的公共端
上电自动播放
循环播放带记忆功能,下次上电后继续从上次播放的曲目从新播放
播放. 带LED指示灯显示
PCB板子尺寸 34.23MM(左右距离)*22.33MM(上下距离)*1MM(厚度)
外观最大尺寸 37.09MM(左右最大距离)*22.33MM(上下最大距离)*2.97MM(最大厚度)
一节3.7V600MA锂电池 (043545),充足电后,开最大音量大约可使用3.5个小时,很省电